is an Universal Midi Keyboard Electronics
to built custom-made Midi
controllers that include a keyboard.
Combining the MKE
with our controller electronics
Pocket Electronic, Dial Electronic, CTM64 or MTC64 allows the construction of an unique Midi
controller that exactly meets the requirements of the user.
These units can be connected to MKE:
manufactured by FATAR/Italy with 2, 3, 4 or 5 octaves
(keyboard types TP6, TP60...64, TP/7, TP/8 or TP/9, with velocity)
Pitch bend wheel (special spring-loaded rotary potentiometer)
Modulation wheel (special rotary potentiometer)
Remark: Because of technical reasons only the single modulation
wheels of our accessories list can be used in combination with MKE
but not the modulation
wheel set !
Rotary or fader potentiometer for loudness/volume control (Midi CC#7)
After touch sensor or socket for sustain switch or another potentiometer for any Midi
pc board has these controls available:
6 black rectangle momentary buttons (about 12 x 22 mm) with integrated LEDs (measures of the complete button area about 76 x 22 mm)
3-digit LED display (about 19 x 38 mm)
The 6 buttons are used to control these parameters:
Midi channel 1...16
Transpose (lowest note in octave intervals, 0-12-24-36-48-60)
Program change 0...127
Controller number 0...127 resp. After touch
Up (increment of the value shown in the display)
Down (decrement of the value shown in the display)
In addition one can select between dynamic and non-dynamic operation. In the non-dynamic mode the (fixed) velocity value can be adjusted. MKE
has a non-volatile memory for the parameters Midi
channel, transpose, program number, controller number and dynamic/non-dynamic mode. After the next power on the previous values are called up.
MKE is equipped with Midi
In and Midi
Out. The data appearing at the Midi
in are merged to the data generated by the MKE.
Consequently several MKE
can be daisy-chained or combined with other OEM controllers (e.g. Pocket Electronic, Dial Electronic, CTM64 , MTC64) to built a custom-made Midi
MKE is available only as an assembled and tested pc board. The pc board measures are about 71 mm (length) x 85 (width) x 45 mm (height). Four mounting holes with 3 mm diameter are available for mounting the pc board to a suitable base or front panel e.g. with distance sleeves or spacers and screws. We also offer keybeds and cable sets that are suitable for MKE.
specify the type of keyboard
that has to be connected to MKE
(2/3 or 4/5 octaves).
This is necessary as the keyboards
have different types of connectors. If no specifications are made the MKE
is delivered in the 4/5 octave version. If you have no keyboard
available we recommend to order the keyboard
together with the MKE
as in this case all components (MKE, keyboard,
cable set) can be harmonized. The cables leading to the keyboards
are not included and have to be ordered in addition. We do not offer a suitable housing as this would have to be completely different for various combinations of keyboards
and controlling elements.
An external power supply ([email protected]
250mA) is used. The wall outlet power supply adapter for 230V mains voltage and European type mains plug is included with the MKE.
basic knowledge is required to install the MKE electronics
and to connect the controlling elements. If you are not sure if your knowledge is sufficient please consult an expert. We cannot take back modules
that have become defective because of wrong installation or wrong connection of the keyboards
or controlling elements. We also cannot take back modules
or cables which have been soldered by the user.