Kategorie
Zamknij X

Expert Sleepers - ES 3 mk4 Eurorack ADAT Lightpipe/CV Interface

Brak w magazynie

[:pl]The ES-3 is a Eurorack format module which converts eight channels of ADAT Lightpipe input to DC coupled outputs on 3.5mm jacks, for the ultimate convenience in connection of a DAW directly to analogue synthesizers. February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:
  • Illuminated jack sockets
  • Less deep
[:en]

The ES-3 is a Eurorack format module which converts eight channels of ADAT Lightpipe input to DC coupled outputs on 3.5mm jacks, for the ultimate convenience in connection of a DAW directly to analogue synthesizers.

February 2017 sees the launch of the "ES-3 mk4". Functionally equivalent to the ES-3 mk3, the mk4 adds these improvements:

  • Illuminated jack sockets
  • Less deep
[:]

Zakupy z Mode.M Modular są zawsze bezpieczne.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL

SZYBKA DOSTAWA KURIEREM LUB PACZKOMATEM
miesiące gwarancji
darmowa dostawa do polski od 500 PLN

Opis

[:pl]The outputs can be used as control voltages (CVs), for example with software such as Expert Sleepers Silent Way, and can also be used as audio outputs at high, modular synth-compatible levels.

With the ES-3, a single optical cable is all that is need to bring direct CV control from your DAW right into the heart of a modular system.

Specifications


The ES-3's specifications are as follows:

  • Panel width: 8HP

  • Module depth: 50mm

  • Input connection: optical, ADAT Lightpipe standard

  • D/A conversion: 24 bit, 113dB SNR typical

  • Output connections: 8x 3.5mm jacks, DC-coupled

  • Maximum output voltage: approximately ±10V DC

  • Indicators: LED for ADAT clock sync; illuminated sockets indicate output voltage (+ve/-ve)

  • Current draw: 148mA on the +12V rail, 18mA on the -12V rail


The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 16 way IDC, with -12V furthest from the top of the board.[:en]

The outputs can be used as control voltages (CVs), for example with software such as Expert Sleepers Silent Way, and can also be used as audio outputs at high, modular synth-compatible levels.


With the ES-3, a single optical cable is all that is need to bring direct CV control from your DAW right into the heart of a modular system.


Specifications


The ES-3's specifications are as follows:



  • Panel width: 8HP

  • Module depth: 50mm

  • Input connection: optical, ADAT Lightpipe standard

  • D/A conversion: 24 bit, 113dB SNR typical

  • Output connections: 8x 3.5mm jacks, DC-coupled

  • Maximum output voltage: approximately ±10V DC

  • Indicators: LED for ADAT clock sync; illuminated sockets indicate output voltage (+ve/-ve)

  • Current draw: 148mA on the +12V rail, 18mA on the -12V rail


The front panel is drilled for both Doepfer and Analogue Systems mounting holes (using a 'slot' rather than a single round hole). The power connector is a Doepfer standard 16 way IDC, with -12V furthest from the top of the board.

[:]
x
Z naszych informacji z tajemniczego źródła wynika, że używasz oprogramowania blokującego reklamy typu AdBlock
Nasza strona nie wyświetla ŻADNYCH reklam, jednak używanie AdBlocka może wpływać na funkcjonowanie strony
Prosimy o rozważenie wyłączenia oprogramowania blokującego reklamy na naszej stronie.