MIX 03 - Rebel Technology
DescriptionControls The knobs set the gain of each input. The top knob sets the gain of the first input, second knob sets the gain of input two, and so on. Jacks The first row of jacks are the inputs for channels 1 and 2. The bottom row have the inputs for channels 3 and 4, while the output is situated in the centre. Bus On the back of the module there are three interconnect headers. Two 5-pin headers, labelled 5I and 5O, connect the input channels and normalled inputs. Normalling means that a connection can be made between two modules when nothing is inserted into the normalled jack. Inserting a plug into the jack breaks the normalled connection. An additional 5-pin output header provides post fader level interconnection. Connecting it to another Mix module’s normalled inputs will forward the inputs post gain, so that the Mix 03 knobs can be used for pre gain control. Connecting the input bus of two Mix 03 modules creates a 4 in / 2 out matrix. The modules can still be used independently while connected to the same input and output bus. Levels By default the Mix 03 has audio taper knobs. At fully clockwise, the output level is +6dB, 2x gain. Unity gain is at 3 o’clock, and infinite attenuation at the fully anti-clockwise position. If required, linear taper can be configured by cutting the solder jumpers on the back of the module. Outputs The output provides DC coupled Eurorack output level, suitable for both audio and control voltage mixing.
- 16-pin Doepfer/Eurorack
- Reverse voltage protected
- +12v: < 12mA
- -12v: < 12mA
- Outputs: <= 1k Ohm
- Inputs: >= 100k Ohm
Open HardwareMix 03 is Open Hardware, published under the Gnu GPL. The schematics and BOM are publicly available on GitHub. Please send your patches to us as pull requests and bug reports as issues on GitHub.
Połączenie z serwerem jest szyfrowane z użyciem klucza SSL
SZYBKA DOSTAWA KURIEREM LUB PACZKOMATEM
darmowa dostawa do polski od 500 PLN